FS83 Serial Fingerprint Authentication Module

End-of-life product

• Has internal memory that can store up to 2500 fingerprint templates.
• Any host system can control the FS83 via standard 4 wires serial interface to enroll finger and recognize finger..
• Free of cost development tools provided to the customer for integrating the FS83 with any host system.

Any host system can control the FS83 via standard 4 wires serial interface to enroll and recognize fingerprints. The recognition result is sent from FS83 to the host. It can be used to add fingerprint recognition function to existing products such as access control devices, point of sales machines, electronic safes, etc.

Fingerprint images and templates can be transferred between FS83 and host system for making flexible application. Futronic's provides development tools to our customer free of charge for integrating the FS83 with their host systems.

• Fingerprint scanner:
• Fingerprint scanning window size is 16x24mm
• Image resolution is 480x320 pixel, 500 DPI
• Raw fingerprint image file size is 150K byte
• Light source: Infrared LED
• Fingerprint Recognition engine:
• Processor: Analog Device ADSP-BF532
• 16MB SDRAM and 16MB Flash memory
• Can store up the 2500 fingerprint templates
• Futronic proprietary software (fingerprint recognition algorithm)
• Fingerprint recognition accuracy: FAR-10^-6, FRR-10^-2
• Fingerprint template format same as all other Futronic products
• Electrical:
• 4 wires serial interface, VCC, GND, TX and RX. Speed up to 961200bps.
• Supply voltage: 5V. Max current consumption: 200mA
• ESD: contact 8kV and air discharge 16kV no permanent damage
• Others:
• Weight: 200 gms
• Size: 80mm(L) x 80mm(W) x 40mm(H)
• Operation temperature: -20 to +55°C
• Fingerprint scanning window is waterproof

• FS83 Starter Kit